HC_APTBS

Software/HC_APTBS

Fork 0

Commit Graph

Author	SHA1	Message	Date
LucianoDev	d9775b48be	feat: chart grid, pressure tolerance bands, QDelivery RPM normalization, pump page polish Charts - Add faint background grid (0.75px, #E0E0E0) to all live charts; matches PDF report style - Show min/max tolerance bands on P1/P2 pressure charts during test runs (previously only Q-Delivery/Q-Over) - Broaden BenchService.ToleranceUpdated to fire for every phase receive; UI routes by name - Clear P1/P2 traces on PhaseChanged alongside Delivery/Over CAN - Normalize QDelivery flow rate to 1000 RPM reference before IIR filter so RPM spikes are low-pass filtered with flow-rate transients (matches old_source behavior) Pump page - Reorder columns: identification left, commands center, live data right - PreIn control always visible; disabled when pump lacks pre-injection (rename IsPreInVisible -> IsPreInAvailable) - Swap value/label order in command cards - Remove redundant KlineErrors row from identification card Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>	2026-04-20 21:42:30 +02:00
LucianoDev	70be693116	feat: redesign Pump page with Fluent card layout, bottom snackbar, and RPM chart - Replace sub-nav + HiddenTabsTabControl with 3-column Fluent card layout: PumpCommandsCard (vertical ME/FBKW/PreIn sliders) + DfiCalibrationCard / PumpLiveDataCard (KPI tiles + RPM rolling chart + redesigned status bytes) / PumpIdentificationCard + DtcCard - Add PumpTopStripView: pump selector, model badge, CAN + K-Line chips - Move immobilizer unlock to MainWindow bottom snackbar (UnlockSnackbarView): auto-close on success after 3 s, persist on failure with manual Dismiss - Redesign StatusDisplayView to 2×8 rounded 28px tiles with bit index + tooltip - Add NullToVisibilityConverter; add SnackbarShell, PumpCard, and related styles - Delete obsolete views: UnlockProgressDialog, UnlockPanelView, PumpIdentificationPanelView, PumpLiveDataView, DfiManageView, DtcListView, PumpControlView - PumpPageViewModel: remove PumpSubPage enum, add RpmChart wired to Root.PumpRpm Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-04-20 14:03:47 +02:00

Author

SHA1

Message

Date

LucianoDev

d9775b48be

feat: chart grid, pressure tolerance bands, QDelivery RPM normalization, pump page polish

Charts
- Add faint background grid (0.75px, #E0E0E0) to all live charts; matches PDF report style
- Show min/max tolerance bands on P1/P2 pressure charts during test runs (previously only Q-Delivery/Q-Over)
- Broaden BenchService.ToleranceUpdated to fire for every phase receive; UI routes by name
- Clear P1/P2 traces on PhaseChanged alongside Delivery/Over

CAN
- Normalize QDelivery flow rate to 1000 RPM reference before IIR filter so RPM spikes are low-pass filtered with flow-rate transients (matches old_source behavior)

Pump page
- Reorder columns: identification left, commands center, live data right
- PreIn control always visible; disabled when pump lacks pre-injection (rename IsPreInVisible -> IsPreInAvailable)
- Swap value/label order in command cards
- Remove redundant KlineErrors row from identification card

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

2026-04-20 21:42:30 +02:00

LucianoDev

70be693116

feat: redesign Pump page with Fluent card layout, bottom snackbar, and RPM chart

- Replace sub-nav + HiddenTabsTabControl with 3-column Fluent card layout:
  PumpCommandsCard (vertical ME/FBKW/PreIn sliders) + DfiCalibrationCard /
  PumpLiveDataCard (KPI tiles + RPM rolling chart + redesigned status bytes) /
  PumpIdentificationCard + DtcCard
- Add PumpTopStripView: pump selector, model badge, CAN + K-Line chips
- Move immobilizer unlock to MainWindow bottom snackbar (UnlockSnackbarView):
  auto-close on success after 3 s, persist on failure with manual Dismiss
- Redesign StatusDisplayView to 2×8 rounded 28px tiles with bit index + tooltip
- Add NullToVisibilityConverter; add SnackbarShell, PumpCard, and related styles
- Delete obsolete views: UnlockProgressDialog, UnlockPanelView,
  PumpIdentificationPanelView, PumpLiveDataView, DfiManageView,
  DtcListView, PumpControlView
- PumpPageViewModel: remove PumpSubPage enum, add RpmChart wired to Root.PumpRpm

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

2026-04-20 14:03:47 +02:00

2 Commits