<ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
                    xmlns:sys="clr-namespace:System;assembly=System.Runtime">

    <!-- ══════════════════════════════════════════════════════════════════
         English (ENG)
         ══════════════════════════════════════════════════════════════════ -->

    <!-- ── App ──────────────────────────────────────────────────────────── -->
    <sys:String x:Key="App.Title">HC_APTBS — Herlic Test Bench</sys:String>

    <!-- ── Navigation rail ──────────────────────────────────────────────── -->
    <sys:String x:Key="Nav.Dashboard">Dashboard</sys:String>
    <sys:String x:Key="Nav.Bench">Bench</sys:String>
    <sys:String x:Key="Nav.Pump">Pump</sys:String>
    <sys:String x:Key="Nav.Tests">Tests</sys:String>
    <sys:String x:Key="Nav.Results">Results</sys:String>
    <sys:String x:Key="Nav.Settings">Settings</sys:String>

    <!-- ── Dashboard page ───────────────────────────────────────────────── -->
    <sys:String x:Key="Dashboard.Readings">Bench readings</sys:String>
    <sys:String x:Key="Dashboard.Connections">Connections</sys:String>
    <sys:String x:Key="Dashboard.Conn.Can">CAN bus</sys:String>
    <sys:String x:Key="Dashboard.Conn.Bench">Bench controller</sys:String>
    <sys:String x:Key="Dashboard.Conn.Pump">Pump ECU</sys:String>
    <sys:String x:Key="Dashboard.Conn.KLine">K-Line session</sys:String>
    <sys:String x:Key="Dashboard.StateOnline">ONLINE</sys:String>
    <sys:String x:Key="Dashboard.StateOffline">OFFLINE</sys:String>
    <sys:String x:Key="Dashboard.StateOpen">OPEN</sys:String>
    <sys:String x:Key="Dashboard.StateClosed">CLOSED</sys:String>
    <sys:String x:Key="Dashboard.StateFailed">FAILED</sys:String>
    <sys:String x:Key="Dashboard.Alarms">Active alarms</sys:String>
    <sys:String x:Key="Dashboard.AlarmsNone">System OK — no active alarms</sys:String>
    <sys:String x:Key="Dashboard.TestSummary">Test summary</sys:String>
    <sys:String x:Key="Dashboard.TestActive">Active:</sys:String>
    <sys:String x:Key="Dashboard.TestPhase">Phase:</sys:String>
    <sys:String x:Key="Dashboard.NoTestRunning">No test is currently running.</sys:String>
    <sys:String x:Key="Dashboard.LastTestPass">Last test: PASS</sys:String>
    <sys:String x:Key="Dashboard.LastTestFail">Last test: FAIL</sys:String>
    <sys:String x:Key="Dashboard.Action.StartTest">Start Test</sys:String>
    <sys:String x:Key="Dashboard.Action.StartTest.Tip">Requires a selected pump and an open CAN connection.</sys:String>
    <sys:String x:Key="Dashboard.Action.Stop">Stop</sys:String>
    <sys:String x:Key="Dashboard.Action.EmergencyStop">EMERGENCY STOP</sys:String>

    <!-- ── Dashboard KPI tile labels ──────────────────────────────────────── -->
    <sys:String x:Key="Dashboard.Kpi.Rpm">Bench RPM</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Qdelivery">Q delivery</sys:String>
    <sys:String x:Key="Dashboard.Kpi.P1">Pressure P1</sys:String>
    <sys:String x:Key="Dashboard.Kpi.P2">Pressure P2</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Tin">Oil in T</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Tout">Oil out T</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Unit.Rpm">rpm</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Unit.CcS">cc/s</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Unit.Bar">bar</sys:String>
    <sys:String x:Key="Dashboard.Kpi.Unit.Celsius">°C</sys:String>
    <!-- Dashboard test summary extras -->
    <sys:String x:Key="Dashboard.TestSummary.Elapsed">Elapsed:</sys:String>
    <!-- Dashboard connection chip extras -->
    <sys:String x:Key="Dashboard.Conn.Pump.Label">Pump:</sys:String>
    <sys:String x:Key="Dashboard.Conn.NoPump">No pump</sys:String>

    <!-- ── Dashboard Devices column ─────────────────────────────────────── -->
    <sys:String x:Key="Dashboard.Devices">Devices</sys:String>
    <sys:String x:Key="Dashboard.Devices.Can">CAN</sys:String>
    <sys:String x:Key="Dashboard.Devices.Kline">K-Line</sys:String>
    <sys:String x:Key="Dashboard.Devices.Bench">Bench</sys:String>
    <sys:String x:Key="Dashboard.Devices.Refresh">Refresh</sys:String>
    <sys:String x:Key="Dashboard.Devices.State.Idle">Available</sys:String>
    <sys:String x:Key="Dashboard.Devices.State.Connected">Connected</sys:String>
    <sys:String x:Key="Dashboard.Devices.State.Active">Session active</sys:String>
    <sys:String x:Key="Dashboard.Devices.State.Failed">Error</sys:String>
    <sys:String x:Key="Dashboard.Devices.None">No devices found</sys:String>
    <sys:String x:Key="Dashboard.Devices.BenchRow">Bench controller</sys:String>
    <!-- Confirmation dialogs -->
    <sys:String x:Key="Devices.Confirm.Title">Confirm device change</sys:String>
    <sys:String x:Key="Devices.Confirm.Body.Active">The {0} session is active. Disconnect?</sys:String>
    <sys:String x:Key="Devices.Confirm.Body.TestRunning">A test is running. Changing device state may abort it. Continue?</sys:String>

    <!-- ── Status bar / connection indicators ───────────────────────────── -->
    <sys:String x:Key="Status.Label">Status:</sys:String>
    <sys:String x:Key="Status.Can">CAN</sys:String>
    <sys:String x:Key="Status.Bench">Bench</sys:String>
    <sys:String x:Key="Status.Pump">Pump</sys:String>
    <sys:String x:Key="Status.KLine">K-Line</sys:String>
    <sys:String x:Key="Status.Connected">Connected</sys:String>
    <sys:String x:Key="Status.ConnectionFailed">Connection failed</sys:String>
    <sys:String x:Key="Status.Disconnected">Disconnected</sys:String>

    <!-- ── Bench section ────────────────────────────────────────────────── -->
    <sys:String x:Key="Bench.ConnectCan">Connect CAN</sys:String>
    <sys:String x:Key="Bench.DisconnectCan">Disconnect CAN</sys:String>
    <sys:String x:Key="Bench.Rpm">rpm</sys:String>
    <sys:String x:Key="Bench.Target">Target:</sys:String>
    <sys:String x:Key="Bench.Voltage">V:</sys:String>
    <sys:String x:Key="Bench.TempIn">T. In:</sys:String>
    <sys:String x:Key="Bench.TempOut">T. Out:</sys:String>
    <sys:String x:Key="Bench.Temp4">T. 4:</sys:String>
    <sys:String x:Key="Bench.TempTank">T. Tank:</sys:String>
    <sys:String x:Key="Bench.P1">P1:</sys:String>
    <sys:String x:Key="Bench.P2">P2:</sys:String>
    <sys:String x:Key="Bench.QDelivery">Q-Del.:</sys:String>
    <sys:String x:Key="Bench.QOver">Q-Over:</sys:String>
    <sys:String x:Key="Bench.CcStroke">cc/stroke</sys:String>
    <sys:String x:Key="Bench.PumpRpm">P-RPM:</sys:String>
    <sys:String x:Key="Bench.PumpTemp">P-Temp:</sys:String>
    <sys:String x:Key="Bench.PumpMe">P-ME:</sys:String>
    <sys:String x:Key="Bench.PumpFbkw">P-FBkW:</sys:String>
    <sys:String x:Key="Bench.PsgEncoder">PSG Encoder:</sys:String>

    <!-- ── Bench controls ───────────────────────────────────────────────── -->
    <sys:String x:Key="Bench.Direction">Direction</sys:String>
    <sys:String x:Key="Bench.Left">LEFT</sys:String>
    <sys:String x:Key="Bench.Right">RIGHT</sys:String>
    <sys:String x:Key="Bench.Motor">Bench Motor</sys:String>
    <sys:String x:Key="Bench.Start">START</sys:String>
    <sys:String x:Key="Bench.Stop">STOP</sys:String>
    <sys:String x:Key="Bench.SetRpm">Set RPM:</sys:String>
    <sys:String x:Key="Bench.Go">GO</sys:String>
    <sys:String x:Key="Bench.OilPump">Oil Pump</sys:String>
    <sys:String x:Key="Bench.OilOff">OIL OFF</sys:String>
    <sys:String x:Key="Bench.OilOn">OIL ON</sys:String>
    <sys:String x:Key="Bench.Counter">Counter</sys:String>
    <sys:String x:Key="Bench.Turns">Turns:</sys:String>
    <sys:String x:Key="Bench.Send">Send</sys:String>
    <sys:String x:Key="Bench.Relays">Relays</sys:String>
    <sys:String x:Key="Bench.Electronic">Electronic</sys:String>
    <sys:String x:Key="Bench.DepositCooler">Deposit Cooler</sys:String>
    <sys:String x:Key="Bench.DepositHeater">Deposit Heater</sys:String>
    <sys:String x:Key="Bench.TinCooler">T-in Cooler</sys:String>
    <sys:String x:Key="Bench.Flasher">Flasher</sys:String>
    <sys:String x:Key="Bench.Pulse4Signal">4-Pulse Signal</sys:String>
    <sys:String x:Key="Bench.RelayOn">ON</sys:String>
    <sys:String x:Key="Bench.RelayOff">OFF</sys:String>
    <sys:String x:Key="Bench.TempControl">Temperature</sys:String>
    <sys:String x:Key="Bench.Setpoint">Setpoint</sys:String>
    <sys:String x:Key="Bench.Tolerance">Tolerance</sys:String>
    <sys:String x:Key="Bench.ApplySetpoint">Apply setpoint</sys:String>

    <!-- ── Pump page sub-nav / banners ──────────────────────────────────── -->
    <sys:String x:Key="PumpSub.Identification">Identification</sys:String>
    <sys:String x:Key="PumpSub.Dtcs">Fault Codes</sys:String>
    <sys:String x:Key="PumpSub.LiveData">Live Data</sys:String>
    <sys:String x:Key="PumpSub.Adaptation">Adaptation</sys:String>
    <sys:String x:Key="PumpSub.Unlock">Immobilizer Unlock</sys:String>
    <sys:String x:Key="Pump.KLineClosed">K-Line session is not open. Identify a pump to begin diagnostics.</sys:String>
    <sys:String x:Key="Pump.NoPumpSelected">Select a pump on the Identification tab to enable diagnostics.</sys:String>
    <sys:String x:Key="Pump.NoUnlockActive">No immobilizer unlock is currently in progress for this pump.</sys:String>
    <sys:String x:Key="PumpLive.Engineering">Engineering values (raw)</sys:String>

    <!-- ── DTC list ─────────────────────────────────────────────────────── -->
    <sys:String x:Key="Dtc.Read">Read DTCs</sys:String>
    <sys:String x:Key="Dtc.Clear">Clear DTCs</sys:String>
    <sys:String x:Key="Dtc.NoFaults">No fault codes reported by the ECU.</sys:String>
    <sys:String x:Key="Dtc.LastRead">Last read:</sys:String>
    <sys:String x:Key="Dtc.Cleared">Fault codes cleared.</sys:String>

    <!-- ── Auth gate ────────────────────────────────────────────────────── -->
    <sys:String x:Key="AuthGate.LockedTitle">Authentication required</sys:String>
    <sys:String x:Key="AuthGate.LockedMessage">This section can modify pump parameters. Sign in to unlock.</sys:String>
    <sys:String x:Key="AuthGate.Authenticate">Authenticate…</sys:String>
    <sys:String x:Key="AuthGate.UnlockedAs">Unlocked as</sys:String>
    <sys:String x:Key="AuthGate.Lock">Lock</sys:String>

    <!-- ── Pump live data ───────────────────────────────────────────────── -->
    <sys:String x:Key="Pump.THyb">T-hyb</sys:String>
    <sys:String x:Key="Pump.Rpm">RPM</sys:String>
    <sys:String x:Key="Pump.TEin">T-ein</sys:String>
    <sys:String x:Key="Pump.UnitRpm">1/min</sys:String>
    <sys:String x:Key="Pump.UnitCelsius">°C</sys:String>
    <sys:String x:Key="Pump.UnitUs">µs</sys:String>
    <sys:String x:Key="Pump.Commands.Title">Pump Commands</sys:String>
    <sys:String x:Key="Pump.Commands.Me">ME</sys:String>
    <sys:String x:Key="Pump.Commands.Fbkw">FBKW</sys:String>
    <sys:String x:Key="Pump.Commands.PreIn">Pre-inj</sys:String>
    <sys:String x:Key="Pump.LiveData.Title">Live Data</sys:String>
    <sys:String x:Key="Pump.LiveData.RPM">Pump RPM</sys:String>
    <sys:String x:Key="Pump.LiveData.THyb">T-hyb</sys:String>
    <sys:String x:Key="Pump.LiveData.TEin">T-ein</sys:String>
    <sys:String x:Key="Pump.LiveData.Me">ME</sys:String>
    <sys:String x:Key="Pump.LiveData.Fbkw">FBKW</sys:String>
    <sys:String x:Key="Pump.LiveData.RpmChart">RPM trend</sys:String>
    <sys:String x:Key="Pump.Status.Active">Active</sys:String>
    <sys:String x:Key="Pump.Dfi.Title">Idling Calibration</sys:String>
    <sys:String x:Key="Pump.Dfi.Version">Version</sys:String>
    <sys:String x:Key="Pump.Dfi.Current">Current DFI</sys:String>
    <sys:String x:Key="Pump.Dtcs.Title">Fault Codes</sys:String>
    <sys:String x:Key="Pump.Identification.Title">Identification</sys:String>
    <sys:String x:Key="Pump.TopStrip.Brand">Brand</sys:String>
    <sys:String x:Key="Pump.TopStrip.NoPump">No pump selected</sys:String>
    <sys:String x:Key="Pump.TopStrip.Can">CAN</sys:String>
    <sys:String x:Key="Pump.TopStrip.KLine">K-Line</sys:String>
    <sys:String x:Key="Pump.NoPumpBanner">No pump selected — select a pump to enable diagnostics.</sys:String>
    <sys:String x:Key="Pump.FastUnlock">Fast unlock attempt...</sys:String>

    <!-- ── Pump identification ──────────────────────────────────────────── -->
    <sys:String x:Key="PumpId.Label">Pump:</sys:String>
    <sys:String x:Key="PumpId.Dfi">DFI:</sys:String>
    <sys:String x:Key="PumpId.PumpId">Pump ID:</sys:String>
    <sys:String x:Key="PumpId.SerialNo">Serial No:</sys:String>
    <sys:String x:Key="PumpId.ModelRef">Model Ref:</sys:String>
    <sys:String x:Key="PumpId.DataRecord">Data Record:</sys:String>
    <sys:String x:Key="PumpId.PumpCtrl">Pump Ctrl:</sys:String>
    <sys:String x:Key="PumpId.ModelIndex">Model Index:</sys:String>
    <sys:String x:Key="PumpId.SwVer1">SW Ver 1:</sys:String>
    <sys:String x:Key="PumpId.SwVer2">SW Ver 2:</sys:String>
    <sys:String x:Key="PumpId.Errors">Errors:</sys:String>
    <sys:String x:Key="PumpId.Error">Error:</sys:String>
    <sys:String x:Key="PumpId.ReadKLine">Read K-Line</sys:String>
    <sys:String x:Key="PumpId.Disconnect">Disconnect</sys:String>
    <sys:String x:Key="PumpId.NoKLineDevice">No K-Line device found</sys:String>

    <!-- ── DFI management ───────────────────────────────────────────────── -->
    <sys:String x:Key="Dfi.Read">READ</sys:String>
    <sys:String x:Key="Dfi.Write">WRITE</sys:String>
    <sys:String x:Key="Dfi.Label">DFI:</sys:String>
    <sys:String x:Key="Dfi.Auto">AUTO</sys:String>

    <!-- ── Pump control sliders ─────────────────────────────────────────── -->
    <sys:String x:Key="PumpCtrl.Fbkw">FBKW - Advance Control</sys:String>
    <sys:String x:Key="PumpCtrl.Me">ME - Quantity Control</sys:String>
    <sys:String x:Key="PumpCtrl.PreInj">ME - Pre-inj Quantity</sys:String>
    <sys:String x:Key="PumpCtrl.MinStepMax">Min / Step / Max</sys:String>
    <sys:String x:Key="PumpCtrl.Min">Min</sys:String>
    <sys:String x:Key="PumpCtrl.Step">Step</sys:String>
    <sys:String x:Key="PumpCtrl.Max">Max</sys:String>

    <!-- ── Bench parameter config ───────────────────────────────────────── -->
    <sys:String x:Key="BenchParam.CanBusId">CAN-Bus ID (0x)</sys:String>
    <sys:String x:Key="BenchParam.ByteL">Byte L</sys:String>
    <sys:String x:Key="BenchParam.ByteH">Byte H</sys:String>
    <sys:String x:Key="BenchParam.FilterAlpha">Filter α</sys:String>
    <sys:String x:Key="BenchParam.EnableFormula">Enable formula</sys:String>

    <!-- ── Angle display ────────────────────────────────────────────────── -->
    <sys:String x:Key="Angle.Header">ADVANCE MONITORING</sys:String>
    <sys:String x:Key="Angle.Psg">PSG:</sys:String>
    <sys:String x:Key="Angle.Inj">INJ:</sys:String>
    <sys:String x:Key="Angle.AbsDeg">ABS °:</sys:String>
    <sys:String x:Key="Angle.LockDeg">LOCK °:</sys:String>
    <sys:String x:Key="Angle.SetPsgZero">Set PSG zero reference</sys:String>
    <sys:String x:Key="Angle.SetInjZero">Set INJ zero reference</sys:String>

    <!-- ── Test panel ───────────────────────────────────────────────────── -->
    <sys:String x:Key="Test.StartTest">▶  START TEST</sys:String>
    <sys:String x:Key="Test.Stop">■  STOP</sys:String>
    <sys:String x:Key="Test.Report">📄  Report</sys:String>
    <sys:String x:Key="Test.ShowValues">Show values</sys:String>
    <sys:String x:Key="Test.CheckAll">Check All</sys:String>
    <sys:String x:Key="Test.SecondsRemaining">s remaining</sys:String>
    <sys:String x:Key="Test.Condition">Cond:</sys:String>
    <sys:String x:Key="Test.Measurement">Meas:</sys:String>
    <sys:String x:Key="Test.MeasPerSec">M/s:</sys:String>
    <sys:String x:Key="Test.Required">Required:</sys:String>
    <sys:String x:Key="Test.TestLabel">Test:</sys:String>
    <sys:String x:Key="Test.Critical">Critical</sys:String>
    <sys:String x:Key="Test.Started">Test started...</sys:String>
    <sys:String x:Key="Test.Stopped">Test stopped.</sys:String>

    <!-- ── Tests-page wizard ──────────────────────────────────────────────── -->
    <sys:String x:Key="Test.Wizard.Plan">1. Plan</sys:String>
    <sys:String x:Key="Test.Wizard.Preconditions">2. Preconditions</sys:String>
    <sys:String x:Key="Test.Wizard.Running">3. Running</sys:String>
    <sys:String x:Key="Test.Wizard.Done">4. Done</sys:String>
    <sys:String x:Key="Test.Wizard.Next">Next ▶</sys:String>
    <sys:String x:Key="Test.Wizard.Back">◀ Back</sys:String>

    <!-- ── Preconditions checklist ────────────────────────────────────────── -->
    <sys:String x:Key="Test.Precheck.Title">Preconditions</sys:String>
    <sys:String x:Key="Test.Precheck.PumpSelected">Pump selected</sys:String>
    <sys:String x:Key="Test.Precheck.CanLive">CAN bus live</sys:String>
    <sys:String x:Key="Test.Precheck.KLineOpen">K-Line session open</sys:String>
    <sys:String x:Key="Test.Precheck.RpmZero">Bench RPM at zero</sys:String>
    <sys:String x:Key="Test.Precheck.OilPumpOn">Oil pump running</sys:String>
    <sys:String x:Key="Test.Precheck.NoCriticalAlarms">No critical alarms</sys:String>
    <sys:String x:Key="Test.Precheck.UserAuth">User authenticated</sys:String>
    <sys:String x:Key="Test.Precheck.FixButton">Fix</sys:String>
    <sys:String x:Key="Test.Precheck.Ready">All preconditions met. Ready to start.</sys:String>
    <sys:String x:Key="Test.Precheck.NotReady">Resolve the items above before starting.</sys:String>
    <sys:String x:Key="Test.Precheck.AuthBanner">This test requires operator authentication.</sys:String>
    <sys:String x:Key="Test.Precheck.AuthButton">Authenticate…</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.SelectPump">Go to Pump page to select a pump.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.CheckCan">Open the Dashboard to check CAN connection.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.OpenKLine">Open a K-Line session on the Pump page.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.StopBench">Stop the bench from the Bench page.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.StartOilPump">Start the oil pump from the Bench page.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.ClearAlarms">Clear critical alarms on the Dashboard.</sys:String>
    <sys:String x:Key="Test.Precheck.Remediation.Authenticate">Authenticate the operator above.</sys:String>

    <!-- ── Running step controls ──────────────────────────────────────────── -->
    <sys:String x:Key="Test.Running.Abort">■ Abort</sys:String>
    <sys:String x:Key="Test.Running.Pause">Pause</sys:String>
    <sys:String x:Key="Test.Running.Resume">Resume</sys:String>
    <sys:String x:Key="Test.Running.Retry">Retry phase</sys:String>
    <sys:String x:Key="Test.Running.Skip">Skip phase</sys:String>
    <sys:String x:Key="Test.Running.ComingSoon">Coming soon</sys:String>

    <!-- ── Done step ──────────────────────────────────────────────────────── -->
    <sys:String x:Key="Test.Done.Passed">PASSED</sys:String>
    <sys:String x:Key="Test.Done.Failed">FAILED</sys:String>
    <sys:String x:Key="Test.Done.ViewFullResults">View full results</sys:String>
    <sys:String x:Key="Test.Done.RunAgain">Run again</sys:String>

    <!-- ── Abort confirmation ─────────────────────────────────────────────── -->
    <sys:String x:Key="Test.Abort.Title">Abort test?</sys:String>
    <sys:String x:Key="Test.Abort.Message">Stopping the test now will end the current phase and return partial results. Continue?</sys:String>
    <sys:String x:Key="Test.Abort.Confirm">Abort</sys:String>
    <sys:String x:Key="Test.Abort.Cancel">Keep running</sys:String>

    <!-- ── Test types ───────────────────────────────────────────────────── -->
    <sys:String x:Key="TestType.Warmup">Warm-up</sys:String>
    <sys:String x:Key="TestType.Adjustment">Adjustment</sys:String>
    <sys:String x:Key="TestType.Flow">Flow</sys:String>
    <sys:String x:Key="TestType.ServoValve">Servo valve</sys:String>
    <sys:String x:Key="TestType.Upstroke">Upstroke</sys:String>
    <sys:String x:Key="TestType.PreInjection">Pre-injection</sys:String>

    <!-- ── Result display ───────────────────────────────────────────────── -->
    <sys:String x:Key="Result.Phase">Phase</sys:String>
    <sys:String x:Key="Result.Parameter">Parameter</sys:String>
    <sys:String x:Key="Result.Target">Target</sys:String>
    <sys:String x:Key="Result.Tolerance">Tol ±</sys:String>
    <sys:String x:Key="Result.Average">Average</sys:String>
    <sys:String x:Key="Result.ResultHeader">Result</sys:String>
    <sys:String x:Key="Result.AllTests">All Tests</sys:String>

    <!-- ── Results page (§5) ────────────────────────────────────────────── -->
    <sys:String x:Key="Results.PageTitle">Results</sys:String>
    <sys:String x:Key="Results.HistoryHeader">Test history (session)</sys:String>
    <sys:String x:Key="Results.DetailHeader">Run detail</sys:String>
    <sys:String x:Key="Results.ObservationsLabel">Observations / Notes</sys:String>
    <sys:String x:Key="Results.ExportButton">Export PDF…</sys:String>
    <sys:String x:Key="Results.EmptyState">No completed tests yet. Finish a test on the Tests page to see it here.</sys:String>
    <sys:String x:Key="Results.NoSelection">Select a run on the left to view its details.</sys:String>
    <sys:String x:Key="Results.InterruptedLabel">INTERRUPTED</sys:String>
    <sys:String x:Key="Results.DeleteTooltip">Remove this entry</sys:String>
    <sys:String x:Key="Results.ClearSessionButton">Clear session</sys:String>
    <sys:String x:Key="Results.ClearSessionConfirm">Clear all history entries for this session?</sys:String>

    <!-- ── Common strings ───────────────────────────────────────────────── -->
    <sys:String x:Key="Common.Pass">PASS</sys:String>
    <sys:String x:Key="Common.Fail">FAIL</sys:String>
    <sys:String x:Key="Common.Accept">Accept</sys:String>
    <sys:String x:Key="Common.Cancel">Cancel</sys:String>
    <sys:String x:Key="Common.Close">Close</sys:String>
    <sys:String x:Key="Common.Save">Save</sys:String>
    <sys:String x:Key="Common.Ok">OK</sys:String>
    <sys:String x:Key="Common.Yes">Yes</sys:String>
    <sys:String x:Key="Common.No">No</sys:String>
    <sys:String x:Key="Common.Warning">WARNING</sys:String>
    <sys:String x:Key="Common.Disabled">disabled</sys:String>
    <sys:String x:Key="Common.Dismiss">Dismiss</sys:String>

    <!-- ── Dialog: Report ───────────────────────────────────────────────── -->
    <sys:String x:Key="Dialog.Report.Title">Generate Report</sys:String>
    <sys:String x:Key="Dialog.Report.ClientList">Client List</sys:String>
    <sys:String x:Key="Dialog.Report.ClientData">Client Data</sys:String>
    <sys:String x:Key="Dialog.Report.CompanyData">Company Data</sys:String>
    <sys:String x:Key="Dialog.Report.Name">Name:</sys:String>
    <sys:String x:Key="Dialog.Report.ClientInfo">Client information</sys:String>
    <sys:String x:Key="Dialog.Report.Observations">Observations</sys:String>
    <sys:String x:Key="Dialog.Report.Operator">Operator:</sys:String>
    <sys:String x:Key="Dialog.Report.Company">Company:</sys:String>
    <sys:String x:Key="Dialog.Report.CompanyInfo">Company information</sys:String>
    <sys:String x:Key="Dialog.Report.DeleteClient">Delete Client</sys:String>
    <sys:String x:Key="Dialog.Report.Generate">Generate</sys:String>

    <!-- ── Dialog: User authentication ──────────────────────────────────── -->
    <sys:String x:Key="Dialog.UserCheck.Title">User Authentication</sys:String>
    <sys:String x:Key="Dialog.UserCheck.Username">Username:</sys:String>
    <sys:String x:Key="Dialog.UserCheck.Password">Password:</sys:String>

    <!-- ── Dialog: Voltage warning ──────────────────────────────────────── -->
    <sys:String x:Key="Dialog.Voltage.Title">Power Supply Warning</sys:String>
    <sys:String x:Key="Dialog.Voltage.VoltageLabel">VOLTAGE: </sys:String>
    <sys:String x:Key="Dialog.Voltage.PumpRequires">The selected pump requires </sys:String>
    <sys:String x:Key="Dialog.Voltage.PowerSupply"> power supply.</sys:String>
    <sys:String x:Key="Dialog.Voltage.SwitchTo">SWITCH THE POWER SUPPLY TO </sys:String>

    <!-- ── Dialog: Oil pump confirmation ────────────────────────────────── -->
    <sys:String x:Key="Dialog.OilPump.Title">Oil Pump Activation</sys:String>
    <sys:String x:Key="Dialog.OilPump.Message">You are about to activate the oil pump. Confirm that the oil level is adequate and all connections are secure before proceeding.</sys:String>
    <sys:String x:Key="Dialog.OilPump.LeaksChecked">I have checked — no leaks, connections are ready</sys:String>

    <!-- ── Dialog: RPM safety warning ───────────────────────────────────── -->
    <sys:String x:Key="Dialog.RpmSafety.Title">RPM Safety Warning</sys:String>
    <sys:String x:Key="Dialog.RpmSafety.Message">The oil pump is OFF. Running the bench motor without oil circulation can cause bearing damage to the pump.</sys:String>
    <sys:String x:Key="Dialog.RpmSafety.OilAndProceed">Turn on oil pump and start the bench</sys:String>
    <sys:String x:Key="Dialog.RpmSafety.ProceedWithout">I know what I'm doing — start without oil</sys:String>

    <!-- ── Dialog: Unlock progress ──────────────────────────────────────── -->
    <sys:String x:Key="Dialog.Unlock.Title">Immobilizer Unlock</sys:String>
    <sys:String x:Key="Dialog.Unlock.Progress">PROGRESS</sys:String>
    <sys:String x:Key="Dialog.Unlock.Phase1">Phase 1: Sending unlock signals</sys:String>
    <sys:String x:Key="Dialog.Unlock.Phase2Testing">Phase 2: Testing</sys:String>
    <sys:String x:Key="Dialog.Unlock.Phase2Sending">Phase 2: Sending...</sys:String>
    <sys:String x:Key="Dialog.Unlock.Cancelled">CANCELLED</sys:String>
    <sys:String x:Key="Dialog.Unlock.Unlocked">UNLOCKED</sys:String>
    <sys:String x:Key="Dialog.Unlock.Failed">UNLOCK FAILED</sys:String>
    <sys:String x:Key="Dialog.Unlock.TypeLabel">Type {0}</sys:String>

    <!-- ── Dialog: K-Line errors ────────────────────────────────────────── -->
    <sys:String x:Key="Dialog.KlineErrors.Title">K-Line Fault Codes</sys:String>
    <sys:String x:Key="Dialog.KlineErrors.Header">Fault codes:</sys:String>
    <sys:String x:Key="Dialog.KlineErrors.Read">Read</sys:String>
    <sys:String x:Key="Dialog.KlineErrors.Clear">Clear</sys:String>

    <!-- ── Dialog: Settings ───────────────────────────────────────────────── -->
    <sys:String x:Key="Dialog.Settings.Title">Settings</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.General">General</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.Safety">Safety</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.Pid">PID</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.Motor">Motor</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.Report">Report</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.KLine">K-Line</sys:String>
    <sys:String x:Key="Dialog.Settings.Tab.Advanced">Advanced</sys:String>

    <sys:String x:Key="Dialog.Settings.Language">Language:</sys:String>
    <sys:String x:Key="Dialog.Settings.DaysKeepLogs">Days to keep logs:</sys:String>

    <sys:String x:Key="Dialog.Settings.TempMax">Max. temperature (°C):</sys:String>
    <sys:String x:Key="Dialog.Settings.TempMin">Min. temperature (°C):</sys:String>
    <sys:String x:Key="Dialog.Settings.SecurityRpmLimit">Safety RPM limit:</sys:String>
    <sys:String x:Key="Dialog.Settings.MaxPressureBar">Max. pressure (bar):</sys:String>
    <sys:String x:Key="Dialog.Settings.ToleranceUp">UP tolerance extension:</sys:String>
    <sys:String x:Key="Dialog.Settings.TolerancePfp">PFP tolerance extension:</sys:String>
    <sys:String x:Key="Dialog.Settings.IgnoreTin">Ignore T-in by default</sys:String>

    <sys:String x:Key="Dialog.Settings.PidP">Proportional (P):</sys:String>
    <sys:String x:Key="Dialog.Settings.PidI">Integral (I):</sys:String>
    <sys:String x:Key="Dialog.Settings.PidD">Derivative (D):</sys:String>
    <sys:String x:Key="Dialog.Settings.PidLoopMs">Loop period (ms):</sys:String>

    <sys:String x:Key="Dialog.Settings.EncoderRes">Encoder resolution:</sys:String>
    <sys:String x:Key="Dialog.Settings.VoltMaxRpm">Voltage for max RPM (V):</sys:String>
    <sys:String x:Key="Dialog.Settings.MaxRpm">Max RPM:</sys:String>
    <sys:String x:Key="Dialog.Settings.RightRelay">Right = relay ON</sys:String>
    <sys:String x:Key="Dialog.Settings.Relations">RPM-Voltage Table</sys:String>
    <sys:String x:Key="Dialog.Settings.RelRpm">RPM</sys:String>
    <sys:String x:Key="Dialog.Settings.RelVoltage">Voltage (V)</sys:String>
    <sys:String x:Key="Dialog.Settings.AddRow">Add</sys:String>
    <sys:String x:Key="Dialog.Settings.RemoveRow">Remove</sys:String>

    <sys:String x:Key="Dialog.Settings.CompanyName">Company name:</sys:String>
    <sys:String x:Key="Dialog.Settings.CompanyInfo">Company information:</sys:String>
    <sys:String x:Key="Dialog.Settings.ReportLogo">Report logo path:</sys:String>
    <sys:String x:Key="Dialog.Settings.BrowseLogoTitle">Select Logo Image</sys:String>

    <sys:String x:Key="Dialog.Settings.KLinePort">K-Line port (FTDI):</sys:String>
    <sys:String x:Key="Dialog.Settings.RefreshPorts">Refresh</sys:String>
    <sys:String x:Key="Dialog.Settings.KLineHint">Select an FTDI device or type the serial number manually.</sys:String>

    <sys:String x:Key="Dialog.Settings.RefreshBench">Bench interface (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.RefreshReading">While reading K-Line (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.RefreshCanBus">CAN bus read (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.RefreshPumpReq">Pump request (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.RefreshPumpParams">Pump params (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.BlinkInterval">Blink interval (ms):</sys:String>
    <sys:String x:Key="Dialog.Settings.FlasherInterval">Flasher interval (ms):</sys:String>

    <sys:String x:Key="Dialog.Settings.UsersHeader">Users</sys:String>
    <sys:String x:Key="Dialog.Settings.ManageUsers">Manage Users...</sys:String>

    <!-- ── Dialog: User management ──────────────────────────────────────── -->
    <sys:String x:Key="Dialog.UserManage.Title">User Management</sys:String>
    <sys:String x:Key="Dialog.UserManage.ColumnUsername">Username</sys:String>
    <sys:String x:Key="Dialog.UserManage.Add">Add...</sys:String>
    <sys:String x:Key="Dialog.UserManage.Remove">Remove</sys:String>
    <sys:String x:Key="Dialog.UserManage.ChangePassword">Change Password...</sys:String>
    <sys:String x:Key="Dialog.UserManage.Close">Close</sys:String>
    <sys:String x:Key="Dialog.UserManage.Prompt.AddTitle">Add User</sys:String>
    <sys:String x:Key="Dialog.UserManage.Prompt.ChangeTitle">Change password for '{0}'</sys:String>
    <sys:String x:Key="Dialog.UserManage.Confirm.RemoveTitle">Remove User</sys:String>
    <sys:String x:Key="Dialog.UserManage.Confirm.Remove">Remove user '{0}'?</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.EmptyTitle">Invalid Input</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.Empty">Username and password cannot be empty.</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.InvalidCharsTitle">Invalid Input</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.InvalidChars">Username must not contain ':' or ','.</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.DuplicateTitle">Duplicate User</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.Duplicate">A user with that name already exists.</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.LastUserTitle">Cannot Remove</sys:String>
    <sys:String x:Key="Dialog.UserManage.Error.LastUser">Cannot remove the last remaining user.</sys:String>

    <!-- ── Error messages ───────────────────────────────────────────────── -->
    <sys:String x:Key="Error.ReportGeneration">Failed to generate report:\n{0}</sys:String>
    <sys:String x:Key="Error.ReportTitle">Report Error</sys:String>
    <sys:String x:Key="Error.PsgSync">PSG sync pulse not detected. Check encoder connection.</sys:String>
    <sys:String x:Key="Error.PsgTitle">PSG Error</sys:String>
    <sys:String x:Key="Error.EmergencyStop">EMERGENCY STOP: {0}</sys:String>
    <sys:String x:Key="Error.KLineNotFound">K-Line device not found. Check that the FTDI adapter is connected.</sys:String>
    <sys:String x:Key="Error.KLineTitle">K-Line Error</sys:String>
    <sys:String x:Key="Error.AuthInvalid">Invalid username or password.\n(Both are case-sensitive.)</sys:String>
    <sys:String x:Key="Error.AuthTitle">Authentication Error</sys:String>

    <!-- ── PDF Report ───────────────────────────────────────────────────── -->
    <sys:String x:Key="Pdf.ReportTitle">VP44 INJECTION PUMP TEST REPORT</sys:String>
    <sys:String x:Key="Pdf.GeneratedBy">Generated by HC-APTBS</sys:String>
    <sys:String x:Key="Pdf.Page">Page </sys:String>
    <sys:String x:Key="Pdf.Of"> of </sys:String>
    <sys:String x:Key="Pdf.Date">Date: {0:dd/MM/yyyy HH:mm}</sys:String>
    <sys:String x:Key="Pdf.Operator">Operator: {0}</sys:String>
    <sys:String x:Key="Pdf.Client">Client: {0}</sys:String>
    <sys:String x:Key="Pdf.PumpIdentification">PUMP IDENTIFICATION</sys:String>
    <sys:String x:Key="Pdf.PumpId">Pump ID:</sys:String>
    <sys:String x:Key="Pdf.Model">Model:</sys:String>
    <sys:String x:Key="Pdf.SerialNo">Serial No.:</sys:String>
    <sys:String x:Key="Pdf.Injector">Injector:</sys:String>
    <sys:String x:Key="Pdf.Tube">Tube:</sys:String>
    <sys:String x:Key="Pdf.Valve">Valve:</sys:String>
    <sys:String x:Key="Pdf.Tension">Tension:</sys:String>
    <sys:String x:Key="Pdf.Rotation">Rotation:</sys:String>
    <sys:String x:Key="Pdf.LockAngle">Lock Angle:</sys:String>
    <sys:String x:Key="Pdf.Measured">Measured:</sys:String>
    <sys:String x:Key="Pdf.Chaveta">Chaveta:</sys:String>
    <sys:String x:Key="Pdf.PreInj">Pre-Inj.:</sys:String>
    <sys:String x:Key="Pdf.EcuData">ECU DATA (K-Line)</sys:String>
    <sys:String x:Key="Pdf.OverallResult">OVERALL TEST RESULT</sys:String>
    <sys:String x:Key="Pdf.TestsExecuted">Tests executed: {0} of {1}</sys:String>
    <sys:String x:Key="Pdf.ParamsEvaluated">Parameters evaluated: {0} / {1} passed</sys:String>
    <sys:String x:Key="Pdf.TestHeader">TEST: {0}</sys:String>
    <sys:String x:Key="Pdf.Phase">Phase</sys:String>
    <sys:String x:Key="Pdf.Parameter">Parameter</sys:String>
    <sys:String x:Key="Pdf.Target">Target</sys:String>
    <sys:String x:Key="Pdf.ToleranceHeader">Tolerance ±</sys:String>
    <sys:String x:Key="Pdf.Average">Average</sys:String>
    <sys:String x:Key="Pdf.Result">Result</sys:String>
    <sys:String x:Key="Pdf.ErrorBits">  ⚠ Error bits: {0}</sys:String>
    <sys:String x:Key="Pdf.NoSampleData">No sample data available for graphical display.</sys:String>
    <sys:String x:Key="Pdf.ChartSamples">Samples: {0}  |  Target: {1}  ±  {2}  |  Average: {3}  |  Result: {4}</sys:String>
    <sys:String x:Key="Pdf.Observations">OBSERVATIONS</sys:String>

</ResourceDictionary>