|
|
5e20601eeb
|
Fixed the closed loop oscillation, PI integrator was to hard, also wrong interpolation algo. Its being tested in car, supposedly should be validated and put into release. 504012
|
2026-04-27 22:03:00 +02:00 |
|
|
|
aa5f88979b
|
ford byte status fix for no dtcs, fbkw fixes and 004002 phi1
|
2026-04-23 15:38:02 +02:00 |
|
|
|
367ffc6950
|
Produces 99.8% accurate results of pwm open loop in lab testing. It is a 004002 and needs bench testing
|
2026-04-20 15:54:36 +02:00 |
|
|
|
122459b6db
|
Added setpoint offset 004002, pending of bench tests
|
2026-04-18 14:38:45 +02:00 |
|
|
|
0c90da4cfb
|
Whole advance control system overhaul. Target angle is now calculated entirely like OEM firmware. Calibration data is fully parsed from a rom dump and a proper file is created with a python extraction tool. Open loop is tested and generates same values as original. In car PID testing has not been done.Voltage compensation is not active as we dont have that parameter's acquisition. 0130 used as flag couldnt be properly decompiled, but logging the ram shows its never blocking the closed loop state. Bench testing is required for verification. Some parameter called setpoint_offset hasnt yet been decompiled, and extractin is through RAM reading. Also modified can_db for T06301 cfgs to include proper FBNW acquisiton
|
2026-04-17 23:32:40 +02:00 |
|
